| Dynamic Centrifuge | |
|
|
The Dynamic Centrifuge is designed according to the principles of a horizontal centrifuge and includes the combination washing and a subsequent drying of shredded plastic material. It is normally installed downstream to a Turbo-Wash and a Sink-Float-Tank.
 |
 |
| Dynamic Centrifuge with Pneumatic Transport | Self-cleaning Sieve-basket (factory foto) |
The Dynamic Centrifuge is designed for special ruggedness (weight of the rotor about 2 t., total weight about 6 t.) and high reliability. The drying effect is caused by the high centrifugal force (1800 U/min), the impact of the rotor blades and the mutual friction of the rotating plastic material. At the same time paper and cellulose is separated from the plastic material and is eliminated with the water. This content can be up to 40% (e.g. at the treatment of industrial waste).
The Dynamic Centrifuge is equipped with a slow counter rotating sieve-basket. The impact of the material causes a self-cleaning effect.
Design:
Technical Data:
| Installed power | 75 [kW] |
| Length/Width/Height | 3000 /1850 / 1830 [mm] |
| Production (dep. on material) | 800-1500 [kg/h] Film, 2000–2500 [kg/h] rigid material |
| Washing water | 78 [lit./min] |
| Cooling water | 23 [lit./min] |
New: Complete recycling plant with 3rd generation concept
