This page was translated automatically by "Google Translate". وقد ترجم هذه الصفحة تلقائيا بواسطة "مترجم جوجل". In case of any problems with the Arabic technical expressions please check the English version of the page. في حال وجود أي مشاكل مع التعبيرات الفنية العربية يرجى مراجعة النسخة الانكليزية من الصفحة.

  Dynamic Centrifuge دينامية الطرد المركزي .                                                                                                      Dynamic Centrifuge

The residual humidity of the material before further processing in the densifier or the extruder is an essential element of the energy consumption of the regeneration plant. الرطوبة المتبقية من المواد المعروضة مزيد من المعالجة في densifier أو الطارد هو عنصر أساسي من استهلاك الطاقة في مصنع تجديد. The Dynamic Centrifuge has proved to be the machine best suited to dry the material, which exits the tank with a humidity of up to 50%, to a residual humidity of  4 -5 % for LDPE or PP Film (even with a contant of about 20 % stretch) and ca 1 -2 % for rigid material such as  HDPE or PP. وقد أثبتت أجهزة الطرد المركزي والحيوي أن يكون الجهاز الأنسب لتجف المواد التي يخرج من دبابة مع رطوبة تصل الى 50 ٪ ، إلى الرطوبة المتبقية من 4 -5 ٪ لالبولي إثيلين المنخفض الكثافة أو السينمائي بروبلين (حتى مع وجود حوالي contant تمتد 20 ٪) وكاليفورنيا 1 -2 ٪ من المواد الصلبة مثل البولي بروبلين أو. The mechanical drying is superior to the thermal drying concerning energy consumption. والميكانيكية تجفيف متفوقة على تجفيف بشأن استهلاك الطاقة الحرارية. A Test Report indicates the results achieved with the Costarelli Dynamic Centrifuge 850/10. وهناك تقرير الاختبار يشير إلى النتائج التي تحققت مع الطرد المركزي الحيوي Costarelli 850/10.

The Dynamic Centrifuge is designed according to the principles of a horizontal centrifuge  and includes the combination washing and a subsequent drying of shredded  plastic material. صممت أجهزة الطرد المركزي والحيوي هو وفقا لمبادئ جهاز للطرد المركزي الأفقي ويتضمن مجموعة الغسيل والتجفيف لاحقة من مادة بلاستيكية تمزيقه. It is normally installed downstream to a Turbo-Wash and a Sink-Float-Tank . وعادة يتم تثبيت اتجاه مجرى النهر إلى توربو غسل و تعويم للدبابات ، غرقت .

Dynamic Centrifuge with discharge of the sink-float tank, drained loading auger and discharge cyclone دينامية الطرد المركزي مع تصريف للدبابات تعويم المصارف ، واستنزفت اوجير التحميل والتفريغ الإعصار Rotor with antii-wear plates and self cleaning counter rotating sieve basket (facotory-photo) الدوار ، مع ارتداء لوحات antii النفس ومكافحة تنظيف سلة غربال الدورية (facotory - صور)

The  Dynamic Centrifuge is designed for special ruggedness (weight of the rotor about  2 t., total weight about  6 t.) and high reliability. صممت أجهزة الطرد المركزي هي ديناميكية للغلظة الخاصة (وزن 2 T. ، مجموع الوزن حول الدوار حوالي 6 ر) ، وموثوقية عالية. The drying effect is caused by the high centrifugal force (1800 U/min), the impact of the rotor blades and the mutual friction of the rotating plastic material. أثر تسبب هو التجفيف بواسطة قوة الطرد المركزي لارتفاع (1800 يو / دقيقة) ، والأثر المترتب على ريش الدوار والاحتكاك المتبادل للمواد البلاستيكية الدورية. At the same time paper and cellulose is separated from the plastic material and is eliminated with the water. في الوقت نفسه السليلوز يتم فصل الورق والبلاستيك من المواد ويتم التخلص من الماء مع. This content can be up to  40% (eg at the treatment of industrial waste). محتوى هذا يمكن أن يكون ما يصل الى 40 ٪ (على سبيل المثال في معالجة النفايات الصناعية).

Video shows separation of Cellulose of Rejects with Turbowash and Dynamic Centrifuge فيديو يبين الفصل بين من يرفض سيليلوز مع Turbowash الطرد المركزي والحيوي

The Dynamic Centrifuge is equipped with a slow counter rotating sieve-basket. الطرد المركزي مجهزة هو ديناميكي مع منخل الدورية مكافحة سلة بطيئة. The impact of the material causes a  self-cleaning effect. تأثير المواد يؤدي إلى تأثير التنظيف الذاتي.

Design: تصميم :

Technical Data: البيانات الفنية :

Installed power تركيب السلطة 75 [kW] 75] كيلوواط [
Length/Width/Height الطول / العرض / الارتفاع 3000 /1850 / 1830 [mm] 3000 / 1850 / 1830 [ملم]
Production (dep. on material) الإنتاج (الإعالة على المواد) 800 [kg/h] Film, 1500 [kg/h] rigid material 800 كلغ [/ ح] الأفلام ، 1500 [كغ / ساعة المواد الجامدة]
Washing water مياه الغسيل 78 [lit./min] [78] lit. / دقيقة
Cooling water مياه التبريد 23 [lit./min] [23] lit. / دقيقة

OCI GmbH أوراسكوم للإنشاء شركة محدودة
Baarerstrasse 95, CH 6301 Zug, Schweiz Baarerstrasse 95 ، 6301 اتش زوغ ، Schweiz
GF: Hubert v. Navarini, Dipl. فرنك غيني : هوبير ضد Navarini ، دبلوم. Ing. جي.
Tel +41 81 3531685 / Fax +41 81 3535109 الهاتف : +41 81 3531685 / فاكس +41 81 3535109
navarini@navarini.com navarini@navarini.com
Officine Meccaniche Costarelli srl, Perugia (I) Officine Meccaniche Costarelli الرقم المسلسل ، بيروجيا (الأول)

return to Homepage عودة إلى الصفحة الرئيسية

New: Complete recycling plant with 3 rd generation concept الجديد : مصنع إعادة تدوير كاملة مع مفهوم الجيل الثالث 3

.